Coolants and water additives

The heart of water cooling is not the cooler or the pump, but the coolant, which transports the waste heat in the cooling system and thus makes the cooling of all types of semiconductors (e.g. processors, ...) possible. In addition to removing the heat, a good coolant also protects the individual components within a cooling system from corrosion (especially when using different metals) and bioburden (algae).

Coolant in different containersCoolant in different containers

With the coolants from the Protect family developed and produced by us, you can ensure that your cooling system is optimally protected. The liquids are extremely long-lasting and do not contain any suspended matter, which prevents clogging of heat sinks, radiators, pumps and other components. Due to the high level of protection offered by innovatek Protect against corrosion, you can safely use different metals in your water cooling system. Each coolant from the Protect family has its own strengths and target groups.

Below you will find a brief overview of the advantages of the individual Protect coolants, which you can order in our online shop and in direct contact with our sales department in different containers and with different mixing ratios:

A brief overview of our coolants:

  IP / PRO N R KOR
Basis of the coolantBased on Based on ethylene glycol Based on propylene glycol Based on ethylene glycol Based on water
Frost protectionFrost protection With antifreeze With antifreeze With antifreeze Without antifreeze
Eignung für LebensmittelbereichFood Nicht für den Lebensmittelbereich geeignet Für den Lebensmittelbereich geeignet Nicht für den Lebensmittelbereich geeignet Nicht für den Lebensmittelbereich geeignet
SilikatfreiSilicate free Enthält Silikat Enthält Silikat Frei von Silikat Frei von Silikat
BorfreiBoron free Frei von Bor Enthält Bor Frei von Bor Frei von Bor
BiobefallBiofouling Hoher Schutz vor Biobefall Hoher Schutz vor Biobefall Hoher Schutz vor Biobefall Geringer Schutz vor Biobefall
KorrosionsschutzCorrosion protection Sehr hoher Korrosionsschutz Hoher Korrosionsschutz Geringer Korrosionsschutz Hoher Korrosionsschutz
KühlleistungCooling capacity Durchschnittliche Kühlleistung Geringe Kühlleistung Durchschnittliche Kühlleistung Hohe Kühlleistung

Are you interested in the topic of boron (borax) in coolants? Then you will find more information here.

innovatek Protect IP

The classic among coolants

Protect IP does not contain boron and reliably protects your water cooling or your cooling system against corrosion and bioburden. The coolant is also the optimal choice when using different metals (aluminum and copper). In addition to its use in the industrial sector, it is also indispensable in computer and server systems' cooling circuits.

In addition to corrosion protection, it offers a reduction in surface tension (reduction in the formation of bubbles on surfaces such as the cooler) and a foam brake that reliably counteracts foam formation. Innovatek Protect also acts as a lubricant for the pump.

Type: Concentrate, application mix
Based on: Ethylene glycol
Container: 0.25 to 200 Liter

Buy the Protect IP coolant now!

innovatek Protect PRO

For mixing with tap water

Protect PRO does not contain boron and offers the same excellent properties as our classic Protect IP, but can also be mixed with normal tap water (instead of distilled water). Of course, the Protect PRO is also the ideal choice for using different metals (aluminum and copper) in a cooling circuit.

Type: Concentrate
Based on: Ethylene glycol
Container: 0.25 to 30 Liter

Buy the Protect PRO coolant now!

innovatek Protect N

For use in the food and luxury food sector

Protect N not only offers protection against corrosion and organic contamination, but can also be used in the food and luxury goods sector without any worries because it does not use ethanediol. The use of different metals (aluminum and copper) is not a problem with this coolant either.

In addition to corrosion protection, it offers a reduction in surface tension (reduction in the formation of bubbles on surfaces such as the cooler) and a foam brake that reliably counteracts foam formation. Innovatek Protect also acts as a lubricant for the pump.

Type: Concentrate, application mix
Based on: Propylene glycol
Container: 0.25 to 200 Liter

Buy the Protect N coolant now!

innovatek Protect R

For the use of pumps with shaft seals

Protect R does not contain any silicate, is boron-free and especially suitable for pumps with shaft seals. In addition, the coolant does not contain any substances that are included in the REACH candidate list.

The coolant effectively protects the cooling system from corrosion and bioburden. In addition, the coolant can be used with various metals (steel and copper alloys). In addition to corrosion protection, it offers a reduction in surface tension (reduction in the formation of bubbles on surfaces such as the cooler) and a foam brake that reliably counteracts foam formation. Innovatek Protect also acts as a lubricant for the pump.

Type: Application mix
Based on: Ethylene glycol
Container: 1 to 30 Liter

Buy the Protect R coolant now!

innovatek Protect KOR

Water-based coolant for steel and non-ferrous metal

Protect KOR is a water-based coolant and was specially designed for closed circuits and open systems for hydraulic tests of components. It is therefore suitable e.g. for pumps, pipes and tanks made of steel or copper alloys, especially in production (series production).

The coolant can be used as a coolant or, alternatively, can be brushed or sprayed onto corresponding parts. In addition, it protects your system temporarily and reliably against corrosion and is also the optimal choice for protecting the components when using various non-ferrous metals (copper, brass, bronze, aluminum) and steel within a cooling system.

Type: Concentrate, application mix
Based on: Water
Container: 0.25 to 1 Liter

Buy the Protect KOR coolant now!

All cooling liquids from the Protect family can be individually adapted and mixed to meet your needs. We are also happy to cater to your customer-specific requests when it comes to container sizes. Please contact our sales department directly on +49 (0) 8405 / 9259-0 or send us an email with your requirements.

innovatek Protect wurde offiziell von EHEIM für die Verwendung mit EHEIM Pumpen freigegebenen.

innovatek Protect has been officially approved by EHEIM for use with EHEIM pumps.

Viewed

MADE IN GERMANY


We develop and produce in Germany.